Big Bag Antistatic Type C - Minini DETAILS

BIG BAG ANTISTATIC
TYPE C

Type C big bags are made with interconnected conductive or dissipative yarns incorporated into the polypropylene weave. At no point must the dissipative yarns have a resistance to a clearly marked earthing point of more than 108 OHM. Type C FIBCs show neither occurrence nor propagation of flake discharges. To avoid incendiary discharges type C FIBCs must be properly earthed throughout filling and emptying operations.

Antistatic

DOWNLOAD DATA SHEET FIBCS HANDLING GUIDELINES
  • BIG BAGS AGRICULTURAL INDUSTRY
  • BIG BAGS FOR THE FOOD INDUSTRY
  • BIG BAGS FOR THE MINERARY INDUSTRY
  • BIG BAGS FOR THE CHEMICAL INDUSTRY
  • BIG BAGS FOR THE PLASTIC INDUSTRY
CHARACTERISTICS DIMENSIONS

CAPACITY

  • from 500 to 2000 Kg

CERTIFICATES

  • UN Group II and III
  • ISO 22000

SECURITY FACTOR

  • 5:1 Single Trip
  • 6:1 Standard Duty

ACCESSORIES

  • Liner
  • Customized printed logo up to 4 sides/3 colours
  • Dustproof seams with wick or felt
  • Food grade seams
  • Extra cleaning with vacuum system and metal detector
  • Document pockets
  • B-Lock or Velcro closing systems

SPECIAL OPTIONS

  • Flat Fabric weight: 95-265 gr/m2
  • Minimum weight of coating: 15 gr/m2
  • Flat fabric width: 70-420 cm
  • Maximum Coating fabric width: 225 cm

FABRIC

  • Circular or flat standard
  • Coated flat or circular
  • Anti-static laminated fabric
  • Coloured fabric
Bulk Product Filling or emptyng the FIBC in
MIE of the product no EX Zone Zone 21, 22 Zone 2 Zone 1
10 J > MIE > 3 mJ B, C, D B, C, D C, D C, D1
3 mJ > MIE C, D C, D C, D C, D1
Powder with flammable solvent powder C, D1
  • 1Not without further countermeasures
  • 2Solvent content > 0,5%
DOS DONTS

RECOMMENDATIONS FOR USE

  • Pay attention to the instructions for use written on the label.
  • Before filling the big bag in, check that the discharge spout is properly closed.
  • Once it has been filled in, make sure that the big bag is stable.
  • Shut the load system correctly.
  • Adopt adequate solutions to withhold solid materials in powder form.
  • Consider the possibility of electrostatic charges during filling phase.
  • Check that the forks of the lift truck are round or well protected.
  • Tilt back the forks of the lift truck towards the driver.
  • Adapt the distance between the forks of the lift truck according to the lifting loops of the big bag.
  • Protect the big bags from direct sun exposure and from bad weather.
  • Properly fasten the pallets on truck during transportation.
  • Smaltire il container conformemente alla normativa vigente.

010203040506070809101112

  • Do not exceed the SWL (safety working load) under any circumstances.
  • Do not fill the bag inappropriately.
  • Do not suddenly speed up or slow down during transportation.
  • Do not lift or lower the big bag suddenly during transportation.
  • Do not stop under hanging big bags.
  • Do not position the big bags half outside the truck or off the pallet for it may fall and cause damages.
  • Do not move the lift truck before having entirely lifted the full big bag.
  • Do not tilt forks of truck forward.
  • Do not stack the big bags, unless you have checked their stability.

010203040506070809

STAY IN TOUCH

Head Office: via dell’Artigianato 3/5, 25028 Verolanuova (BS)
Telephone: +39 030 9360002
E-mail: info@minini.it
Fax: +39 030 9360002

    Read our privacy policy.

    SCRIVICI CHIAMACI